Repsol Hydroflux HL 68

Description and recommendations
These are mineral oils, paraffin-based and very refined. Their additives which have been especially selected improve the oils’ stability against rusting and corrosion. They are especially recommended for hydraulic circuits where work conditions are not especially severe. Likewise, they are also appropriate for all types of machinery where “R&O” oils are not needed, such as some pumps, bearings, compressers, etc.
Qualities
Excellent anti-wear properties, EP (F.Z.G.)
Low freezing point facilitating good pumping at low temperatures.
Advanced anti-rust and anti-corrosion capacity. Does not affect copper or its alloys.
Very good water separation properties (demulsibility).
Resistance to foam formation and high de-aeration facilities.
Advanced rust protection. Excellent thermal stability.
Exceptional filterability.
Excellent protection of joints and elastomers.
Quality Level
ISO 6743/4-HL
DIN 51506-VBL y VCL
DIN 51517-CL
DIN 51515-LTD
Technical Data

Available in
Bulk and 185 Kg., drums in Grade 32
185 Kg. drums in grade 46
185 Kg. drums and 875 Kg containers, in grade 68
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.

Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, theground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.

Unless otherwise specified, the values cited in technical characteristics should be considered as